15.01.2020

Which of the following is NOT an impact of using gasoline mixed with ethanol instead of pure petroleum-based gasoline?

decreases cost of fuel
0
reduces dependency on petroleum
O
increases smog
O
decreases acid rain

. 4

Faq

Chemistry
Step-by-step answer
P Answered by Specialist
Answer: b. Fiona is correct because the diagram shows two individual simple machines.

Explanation:
A mechanical device using which we can change the direction or magnitude of force applied is known as simple machine.
For example, in the given diagram there are two individual simple machines.
The machine helps in changing the direction or magnitude of force applied by the man. As a result, it becomes easy for him to carry different things easily from one place to another.
Thus, we can conclude that the statement Fiona is correct because the diagram shows two individual simple machines, is correct.
Answer: b. Fiona is correct because the diagram shows two individual simple machines.

Explanation
Chemistry
Step-by-step answer
P Answered by Master

Calcium (Ca)(On the periodic table, ionization energy increases as you go up and to the right of the periodic table)

Calcium (Ca)(On the periodic table, ionization energy increases as you go up and to the right of the
Chemistry
Step-by-step answer
P Answered by PhD
15 moles.Explanation:Hello,In this case, the undergoing chemical reaction is:Clearly, since carbon and oxygen are in a 1:1 molar ratio, 15 moles of carbon will completely react with 15 moles of oxygen, therefore 15 moles of oxygen remain as leftovers. In such a way, since carbon and carbon dioxide are also in a 1:1 molar ratio, the theoretical yield of carbon dioxide is 15 moles based on the stoichiometry:Best regards.
Chemistry
Step-by-step answer
P Answered by PhD
Answer: 25 g
Explanation: Given:
Original amount (N₀) = 100 g
Number of half-lives (n) = 11460/5730 = 2
Amount remaining (N) = ?
N = 1/2ⁿ × N₀
N = 1/2^2 × 100
N = 0.25 × 100
N = 25 g
Chemistry
Step-by-step answer
P Answered by PhD
Answer: 7.8125 g
Explanation: Given:
Original amount (N₀) = 500 g
Number of half-lives (n) = 9612/1602 = 6
Amount remaining (N) = ?
N = 1/2ⁿ × N₀
N = 1/2^6 × 500
N = 0.015625 × 500
N = 7.8125 g
Chemistry
Step-by-step answer
P Answered by PhD
Answer: B. carbon tetrachloride, CCI4
Explanation: The other options are incorrect. Let's write the correct formulas:
A. Diarsenic pentoxide - As2O5
C. Sodium dichromate - Na2Cr2O7
D. magnesium phosphide - Mg3P2
Chemistry
Step-by-step answer
P Answered by PhD
Answer: 306 L
Explanation: Using the ideal gas law,
PV = nRT
where R = 0.08206 L•atm/(mol•°K), solving for n gives
n = PV/(RT)
n = (845 mmHg) (270 L) / ((0.08206 L•atm/(mol•°K)) (24 °C))

Convert the given temperature to °K and the given pressure to atm:
24 °C = (273.15 + 24) °K ≈ 297.2 °K
(845 mmHg) × (1/760 atm/mmHg) ≈ 1.11 atm

Then the balloon contains
n = (1.11 atm) (270 L) / ((0.08206 L•atm/(mol•°K)) (297.2 °K))
n ≈ 12.3 mol
of He.

Solve the same equation for V :
V = nRT/P

Convert the target temperature to °K:
-50 °C = (273.15 - 50) °K = 223.15 °K

Then the volume under the new set of conditions is
V = (12.3 mol) (0.08206 L•atm/(mol•°K)) (223.15 °K) / (0.735 atm)
V ≈ 306 L
Chemistry
Step-by-step answer
P Answered by PhD
Answer: -166.67 degrees Celsius.
Explanation: The equation of state of an ideal gas, also called the Mendeleev-Clapeyron equation, has the form: PV = nRT, where P is the density of the gas, V is the volume of the gas, n is the molar mass of the gas, T is the temperature of the gas, R is the universal gas constant = 8.314 J/(mol*K)
The gas temperature at a pressure of P = 978 mm. mercury column, molar mass n = 3.7 mol, and volume V = 25.12 liters is -166.67 degrees Celsius.
Chemistry
Step-by-step answer
P Answered by PhD
Answer: rate of reaction can be monitored by measuring the time taken for a fixed amount of sulphur to be produced
Explanation: The reaction of sodium thiosulfate with hydrochloric acid is:
Na₂S₂O₃(aq)+2HCl(aq)→2NaCl(aq)+SO₂(g)+S(s)+H₂O(l)
A precipitate of sulphur forms
Therefore rate of reaction can be monitored by measuring the time taken for a fixed amount of sulphur to be produced

Try asking the Studen AI a question.

It will provide an instant answer!

FREE