: asked on revievex
30.12.2021

# Consider laminar flow over a flat plate. Will the friction coefficient change with distance from the leading edge? How about the heat transfer coefficient?

2

06.11.2022, solved by verified expert
Unlock the full answer

Fluid flow

Step-by-step explanation:

The relation between the friction coefficient and the leading edge for the laminar flow over a flat plate is as follows:

…… (1)

Here, is the friction coefficient, is the density of the fluid, V is the velocity of the fluid, is the dynamic viscosity of the fluid, and x is the distance from the leading edge.

From the equation (1), it is clear that the friction coefficient varies inversely with the root of the distance from the leading edge.

Therefore, the friction coefficient changes with the change in the distance from the leading edge.

It is was helpful?

### Faq

Chemistry
P Answered by Master
Explanation: Convert 30 ml to l: 30 mL = 0.03 L
Molarity = mol/l
mol = molarity * L
mol = 0.15 * 0.03 = 0.0045 mol
Chemistry
P Answered by PhD
Explanation: Strontium is an alkaline earth metal, it always exhibits a degree of oxidation in its compounds +2.
Chalcogens are a group of 6 chemical elements (oxygen O, sulfur S, selenium se, tellurium te, polonium Po) that have an oxidation state of -2 => Chalcogens will combine with strontium in a ratio of 1:1.
Chemistry
P Answered by Master

A

Step-by-step explanation:

The input force is 50 N. But it will not create not any change. No mechanical advantage is observed.

Chemistry
P Answered by PhD

52.6 gram

Step-by-step explanation:

It is clear by the equation 2(27+3×35.5)= 267 gm of AlCl3 reacts with 6× 80 = 480 gm of Br2 . So 29.2 gm reacts = 480× 29.2/267= 52.6 gm

Chemistry
P Answered by Master

Calcium (Ca)(On the periodic table, ionization energy increases as you go up and to the right of the periodic table)

Chemistry
P Answered by PhD

glycoproteins

Explanation:

A positive reaction for Molisch's test is given by almost all carbohydrates (exceptions include tetroses & trioses). It can be noted that even some glycoproteins and nucleic acids give positive results for this test (since they tend to undergo hydrolysis when exposed to strong mineral acids and form monosaccharides).

Chemistry
P Answered by PhD

Taking into accoun the ideal gas law, The volume of a container that contains 24.0 grams of N2 gas at 328K and 0.884 atm is 26.07 L.

An ideal gas is a theoretical gas that is considered to be composed of point particles that move randomly and do not interact with each other. Gases in general are ideal when they are at high temperatures and low pressures.

The pressure, P, the temperature, T, and the volume, V, of an ideal gas, are related by a simple formula called the ideal gas law:

P×V = n×R×T

where P is the gas pressure, V is the volume that occupies, T is its temperature, R is the ideal gas constant, and n is the number of moles of the gas. The universal constant of ideal gases R has the same value for all gaseous substances.

Explanation:

In this case, you know:

P= 0.884 atm

V= ?

n= 0.857 moles (where 28 g/mole is the molar mass of N₂, that is, the amount of mass that the substance contains in one mole.)

R=0.082

T= 328 K

Replacing in the ideal gas law:

0.884 atm×V= 0.857 moles× 0.082 ×328 K

Solving:

V= 26.07 L

The volume of a container that contains 24.0 grams of N2 gas at 328K and 0.884 atm is 26.07 L.

Chemistry
P Answered by PhD
Explanation: Given:
Original amount (N₀) = 500 g
Number of half-lives (n) = 9612/1602 = 6
Amount remaining (N) = ?
N = 1/2ⁿ × N₀
N = 1/2^6 × 500
N = 0.015625 × 500
N = 7.8125 g
Chemistry
P Answered by PhD
Answer: The product formed is potassium chloride.
Explanation:
Precipitation reaction is defined as the chemical reaction in which an insoluble salt is formed when two solutions are mixed containing soluble substances. The insoluble salt settles down at the bottom of the reaction mixture.

The chemical equation for the reaction of potassium phosphate and magnesium chloride follows (look at the picture)

2 moles of aqueous solution of potassium phosphate reacts with 3 moles of aqueous solution of magnesium chloride to produce 1 mole of solid magnesium phosphate and 6 moles of aqueous solution of potassium chloride.
Chemistry
P Answered by PhD
b. basic
c. acidic
d. neutral

Explanation: Acids and bases can be classified in terms of hydrogen ions or hydroxide ions, or in terms of electron pairs. (look at the picture)
Let us note that from the pH scale, a pH of;
0 - 6.9 is acidic
7 is neutral
8 - 14 is basic

But pH= - log [H^+]
pOH = -log [OH^-]
Then;
pH + pOH = 14
Hence;
pH = 14 - pOH

a. [H+] = 6.0 x 10-10M
pH= 9.22 is basic
b. [OH-] = 30 × 10-2M
pH = 13.5 is basic
C. IH+1 = 20× 10-7M
pH = 0.56 is acidic
d. [OH-] = 1.0 x 10-7M
pH = 7 is neutral
What is Studen
Studen helps you with homework in two ways:

## Try asking the Studen AI a question.

It will provide an instant answer!

FREE