(b) The efficiency of the pump which operates the fountain is 70%. Calculate the power supplied to the pump.

Power supplied to the pump is 980000 W or 980 KW

Note: The question is incomplete. The complete question is given below:

On a day with no wind, a fountain in Switzerland propels 30000 kg of water per minute to a height of 140 metres.

a)Calculate the power used in raising the water?

b)The efficiency of the pump which operates the fountain is 70%

calculate the power supplied to the pump?

Explanation:

Efficiency = Power output/Power input * 100%

Power output = work done/ time

where work done = mass * acceleration due to gravity (g) * height

time = 1 minute = 60 seconds

mass of water = 30000 kg, height = 140 meters, g = 9.8 m/s²

Then, work done = 30000 * 140 * 9.8 = 41160000 J

Power output then = 41160000 J / 60 s

Power output = 686000 W

The power input can then be derived from the formula of efficiency

Power input = (Power output * 100)/Efficiency

Power input = (100 * 686000) / 70

Power input = 980000 W

Therefore, power supplied to the pump is 980000 W or 980 KW

Independent variable: the best method to get rid of them.

Dependent variable: washing with soap and water.

Hypothesis: Organic oils

Control group: water

Answer:

Step-by-step explanation:

D.
Heat each cube to the same temperature, place each cube into different containers with 500 grams of water at the same temperature, and measure the temperature of the water.

Answer:

Step-by-step explanation:

To solve this problem, we can use the conservation of energy and conservation of momentum principles.

Conservation of energy:

The total initial energy is the rest energy of the proton and neutron, which is given by:

Ei = (mp + mn)c^2

where mp and mn are the masses of the proton and neutron, respectively, and c is the speed of light.

The total final energy is the rest energy of the deuteron plus the energy of the gamma ray, which is given by:

Ef = (md)c^2 + Eg

where md is the mass of the deuteron and Eg is the energy of the gamma ray.

According to the conservation of energy principle, the initial energy and final energy must be equal, so we have:

Ei = Ef

(mp + mn)c^2 = (md)c^2 + Eg

Conservation of momentum:

The total initial momentum is zero because the proton and neutron are at rest. The total final momentum is the momentum of the deuteron and the momentum of the gamma ray. Since the gamma ray is massless, its momentum is given by:

pg = Eg/c

where pg is the momentum of the gamma ray.

According to the conservation of momentum principle, the total final momentum must be equal to zero, so we have:

0 = pd + pg

where pd is the momentum of the deuteron.

Solving for md and pd:

From the conservation of energy equation, we can solve for md:

md = (mp + mn - Eg/c^2)/c^2

Substituting this expression into the conservation of momentum equation, we get:

pd = -pg = -Eg/c

Substituting the given values, we have:

mp = 1.6726 × 10^-27 kg mn = 1.6749 × 10^-27 kg Eg = 2.2 × 10^6 eV = 3.52 × 10^-13 J

Using c = 2.998 × 10^8 m/s, we get:

md = (1.6726 × 10^-27 kg + 1.6749 × 10^-27 kg - 3.52 × 10^-13 J/(2.998 × 10^8 m/s)^2)/(2.998 × 10^8 m/s)^2 = 3.3435 × 10^-27 kg

pd = -Eg/c = -(3.52 × 10^-13 J)/(2.998 × 10^8 m/s) = -1.1723 × 10^-21 kg·m/s

Therefore, the mass of the deuteron is 3.3435 × 10^-27 kg, and its momentum is -1.1723 × 10^-21 kg·m/s.

Answer:

Step-by-step explanation:

Time taken by the tomatoes to each the ground

using h = 1/2 g t^2 

t^2 = 2h/g = 2 x 50/ 9.8 = 10.2

t = 3.2 sec 

horizontal ditance = speed x time = 3 x 3.2 = 9.6 meters

The question specifies the diameter of the screw, therefore the IMA of this screw is 0.812? / 0.318 = 8.02