Chemistry : asked on 129690
 10.05.2022

The (15-15-15) number on a bag of fertilizer is calculated by an outdated method. All modern fertilizers use PO43- as a source of phosphorus. Use your knowledge of the old methods to determine the moles of phosphorus found in 10.0 grams of (15-15-15)?

. 9

Answer to test

14.11.2022, solved by verified expert
Unlock the full answer

15-15-15 means these are NPK fertilizers which are nitrogen, phosphorus and potassium the source of phosphorus here is P2O5.

It means in 100 gram of P2O5 has 15g  of phosphorus .

100 g of P2O5 is 62 g

1 gram contains 62/100

15 gram of 15-15-15 contains 0.62 ×15

                                                     =   9.30 grams

It is was helpful?

Faq

Chemistry
Step-by-step answer
P Answered by PhD
Answer: chalcogens.
Explanation: Strontium is an alkaline earth metal, it always exhibits a degree of oxidation in its compounds +2.
Chalcogens are a group of 6 chemical elements (oxygen O, sulfur S, selenium se, tellurium te, polonium Po) that have an oxidation state of -2 => Chalcogens will combine with strontium in a ratio of 1:1.
Chemistry
Step-by-step answer
P Answered by PhD

glycoproteins

Explanation:

A positive reaction for Molisch's test is given by almost all carbohydrates (exceptions include tetroses & trioses). It can be noted that even some glycoproteins and nucleic acids give positive results for this test (since they tend to undergo hydrolysis when exposed to strong mineral acids and form monosaccharides).

Chemistry
Step-by-step answer
P Answered by PhD

Answer:

Taking into accoun the ideal gas law, The volume of a container that contains 24.0 grams of N2 gas at 328K and 0.884 atm is 26.07 L.

An ideal gas is a theoretical gas that is considered to be composed of point particles that move randomly and do not interact with each other. Gases in general are ideal when they are at high temperatures and low pressures.

The pressure, P, the temperature, T, and the volume, V, of an ideal gas, are related by a simple formula called the ideal gas law:  

P×V = n×R×T

where P is the gas pressure, V is the volume that occupies, T is its temperature, R is the ideal gas constant, and n is the number of moles of the gas. The universal constant of ideal gases R has the same value for all gaseous substances.

Explanation:

In this case, you know:

P= 0.884 atm

V= ?

n= Answer:Taking into accoun the ideal gas law, The volume of a container that contains 24.0 grams of N 0.857 moles (where 28 g/mole is the molar mass of N₂, that is, the amount of mass that the substance contains in one mole.)

R=0.082Answer:Taking into accoun the ideal gas law, The volume of a container that contains 24.0 grams of N

T= 328 K

Replacing in the ideal gas law:

0.884 atm×V= 0.857 moles× 0.082Answer:Taking into accoun the ideal gas law, The volume of a container that contains 24.0 grams of N ×328 K

Solving:

Answer:Taking into accoun the ideal gas law, The volume of a container that contains 24.0 grams of N

V= 26.07 L

The volume of a container that contains 24.0 grams of N2 gas at 328K and 0.884 atm is 26.07 L.

Chemistry
Step-by-step answer
P Answered by PhD
15 moles.Explanation:Hello,In this case, the undergoing chemical reaction is:Clearly, since carbon and oxygen are in a 1:1 molar ratio, 15 moles of carbon will completely react with 15 moles of oxygen, therefore 15 moles of oxygen remain as leftovers. In such a way, since carbon and carbon dioxide are also in a 1:1 molar ratio, the theoretical yield of carbon dioxide is 15 moles based on the stoichiometry:Best regards.
Chemistry
Step-by-step answer
P Answered by PhD
Answer: B. carbon tetrachloride, CCI4
Explanation: The other options are incorrect. Let's write the correct formulas:
A. Diarsenic pentoxide - As2O5
C. Sodium dichromate - Na2Cr2O7
D. magnesium phosphide - Mg3P2
Chemistry
Step-by-step answer
P Answered by PhD
Answer: a. basic
b. basic
c. acidic
d. neutral

Explanation: Acids and bases can be classified in terms of hydrogen ions or hydroxide ions, or in terms of electron pairs. (look at the picture)
Let us note that from the pH scale, a pH of;
0 - 6.9 is acidic
7 is neutral
8 - 14 is basic

But pH= - log [H^+]
pOH = -log [OH^-]
Then;
pH + pOH = 14
Hence;
pH = 14 - pOH

a. [H+] = 6.0 x 10-10M
pH= 9.22 is basic
b. [OH-] = 30 × 10-2M
pH = 13.5 is basic
C. IH+1 = 20× 10-7M
pH = 0.56 is acidic
d. [OH-] = 1.0 x 10-7M
pH = 7 is neutral
Answer: a. basic
b. basic
c. acidic
d. neutral

Explanation: Acids and bases can be classified
Chemistry
Step-by-step answer
P Answered by PhD
Answer: 306 L
Explanation: Using the ideal gas law,
PV = nRT
where R = 0.08206 L•atm/(mol•°K), solving for n gives
n = PV/(RT)
n = (845 mmHg) (270 L) / ((0.08206 L•atm/(mol•°K)) (24 °C))

Convert the given temperature to °K and the given pressure to atm:
24 °C = (273.15 + 24) °K ≈ 297.2 °K
(845 mmHg) × (1/760 atm/mmHg) ≈ 1.11 atm

Then the balloon contains
n = (1.11 atm) (270 L) / ((0.08206 L•atm/(mol•°K)) (297.2 °K))
n ≈ 12.3 mol
of He.

Solve the same equation for V :
V = nRT/P

Convert the target temperature to °K:
-50 °C = (273.15 - 50) °K = 223.15 °K

Then the volume under the new set of conditions is
V = (12.3 mol) (0.08206 L•atm/(mol•°K)) (223.15 °K) / (0.735 atm)
V ≈ 306 L
Chemistry
Step-by-step answer
P Answered by PhD
Answer: -166.67 degrees Celsius.
Explanation: The equation of state of an ideal gas, also called the Mendeleev-Clapeyron equation, has the form: PV = nRT, where P is the density of the gas, V is the volume of the gas, n is the molar mass of the gas, T is the temperature of the gas, R is the universal gas constant = 8.314 J/(mol*K)
The gas temperature at a pressure of P = 978 mm. mercury column, molar mass n = 3.7 mol, and volume V = 25.12 liters is -166.67 degrees Celsius.
Chemistry
Step-by-step answer
P Answered by PhD
Answer: B. 7.2 x 10(23rd power)
Explanation:
Avogadro's number is defined as the number of particles found in an amount of substance per mole. It is the factor that relates the moles of a substance to the mass of that substance. We will use Avogadro's number to calculate the number of moles of water. as follows:
Avogadro's number = 1 mol = 6.022 x 10^23 particles.
we will use the conversion factor to calculate the number of moles of water:
1.20 = N x (1mol/6.022x10^23 particles)
N = 1.20/(1mol/6.022x10^23 particles)
N = 7.2 x 10(23rd power)
Chemistry
Step-by-step answer
P Answered by PhD
Answer: rate of reaction can be monitored by measuring the time taken for a fixed amount of sulphur to be produced
Explanation: The reaction of sodium thiosulfate with hydrochloric acid is:
Na₂S₂O₃(aq)+2HCl(aq)→2NaCl(aq)+SO₂(g)+S(s)+H₂O(l)
A precipitate of sulphur forms
Therefore rate of reaction can be monitored by measuring the time taken for a fixed amount of sulphur to be produced

Try asking the Studen AI a question.

It will provide an instant answer!

FREE