: asked on xXCoryxKenshinXx
17.01.2023

# 4. (a) The springs of a pickup truck act like a single spring with a force constant of 1.30×105N/m. By how much will the truck be depressed by its maximum load of 1000 kg? (b) If the pickup truck has four identical springs, what is the force constant of each? Please include all of the steps.

0

09.07.2023, solved by verified expert
Unlock the full answer
Force applied on load=mg=1000(9.8)=9800NSpring constant=k=1.30×10^5N/m

Now

#b

It is was helpful?

### Faq

Physics
P Answered by Master
Force applied on load=mg=1000(9.8)=9800NSpring constant=k=1.30×10^5N/m

Now

#b

Physics
P Answered by Specialist
Options:
a. a lower frequency and a shorter wavelength.
b. a higher frequency and a longer wavelength.
c. a lower frequency and a longer wavelength.
d. a higher frequency and a shorter wavelength

d. a higher frequency and a shorter wavelength

Explanation:
The frequency of a wave is inversely proportional to its wavelength. That means that waves with a high frequency have a short wavelength, while waves with a low frequency have a longer wavelength. Light waves have very, very short wavelengths.
For example, Gamma rays have the highest energies, the shortest wavelengths, and the highest frequencies. Radio waves, on the other hand, have the lowest energies, longest wavelengths, and lowest frequencies of any type of EM radiation.
Physics
P Answered by PhD

9.6 meters

Step-by-step explanation:

Time taken by the tomatoes to each the ground

using h = 1/2 g t^2

t^2 = 2h/g = 2 x 50/ 9.8 = 10.2

t = 3.2 sec

horizontal ditance = speed x time = 3 x 3.2 = 9.6 meters

Physics
P Answered by PhD

The question specifies the diameter of the screw, therefore the IMA of this screw is 0.812? / 0.318 = 8.02

Physics
P Answered by PhD
First sum applied the Newton's second law motion: F = ma
Force = mass* acceleration
This motion define force as the product of mass times Acceleration (vs.Velocity). Since acceleration is the change in velocity divided by time,
force=(mass*velocity)/time
such that, (mass*velocity)/time=momentum/time
Therefore we get mass*velocity=momentum
Momentum=mass*velocity
Elephant mass=6300 kg; velocity=0.11 m/s
Momentum=6300*0.11
P=693 kg (m/s)
Dolphin mass=50 kg; velocity=10.4 m/s
Momentum=50*10.4
P=520 kg (m/s)
The elephant has more momentum(P) because it is large.
Physics
P Answered by PhD
The change in temperature is 9.52°CExplanation:Since, the heat supplied by the electric kettle is totally used to increase the temperature of the water.Thus, from the law of conservation of energy can be stated as:Heat Supplied by Electric Kettle = Heat Absorbed by WaterHeat Supplied by Electric Kettle = m C ΔTwhere,Heat Supplied by Electric Kettle = 20,000 JMass of water = m = 0.5 kgSpecific Heat Capacity of Water = C = 4200 J/kg.°CChange in Temperature of Water = ΔTTherefore,20,000 J = (0.5 kg)(4200 J/kg.°C) ΔTΔT = 20,000 J/(2100 J/°C)ΔT = 9.52°C
Physics
P Answered by PhD
Weight of barbell (m) = 100 kg
Uplifted to height (h) = 2m
Time taken= 1.5 s
Work done by Jordan = potential energy stored in barbell = mgh
= 100×2×9.8
= 1960J
Power = energy/time
= 1960/1.5
1306.67watts
Physics
P Answered by PhD
Weight of jasmine (m) = 400 N
Height climbed on wall (h) = 5m
Total time taken in climbing = 5 sec
Work done in climbing the wall = rise in potential energy = mgh
= 400×9.8×51
= 19600J
Power generated by Jasmine = potential energy / time
= 19600/5
= 3920Watts
Physics
P Answered by PhD
The horizontal and vertical motions of balloons are independent from each other.
Let vertical component of initial velocity U' horizontal component of initial velocity U"
Time of landing (t) is found with the help of vertical motion.
Since vertical component of initial velocity of balloon is zero(U' = 0)
From equation h = U't + 1/2gt^2
h = 1/2gt^2
t = √(2h/g)
t = √( 2×150/9.8)
t = 5.53 sec
Horizontal velocity = 50m/s
Horizontal range of balloon, R = U"t
= 50× 5.53
= 27.65m
So the balloon will go 27.65 metre away from the bridge
Physics
P Answered by PhD
Gravity acceleration (g) = 9.8m/s^2
Time (t) = 3sec
Acceleration = velocity/time
Velocity = acceleration×time
= 9.8×3
= 29.4m/s
What is Studen
Studen helps you with homework in two ways:

## Try asking the Studen AI a question.

It will provide an instant answer!

FREE