Manufacturers of small computer devices, such as smartphones, often release a "beta” version of a new product to a small group of people so that the testers can use it in day-to-day life and report back to the manufacturer about how it could be further improved. The beta version is built and released after the designers have already built, tested, and analyzed an initial version at their factory. The initial version is tested like a model of the product, while the beta version is tested under real-life conditions. What best describes how the testing of the initial version and the testing of the beta version fit into the four stages of the process of technological design? The beta version is tested during the second stage, when criteria are being determined, and the initial version is tested during the third stage, when the prototype is being analyzed. The initial version is tested during the first stage to help determine what problems it has, and the beta version is tested during the fourth stage, when results are being reported. The initial version is tested during the third stage to determine what needs to be improved, and the beta version is tested during the fourth stage to ensure that criteria are met. The initial version and the beta version are both tested during the third stage to make sure that the beta version solves the identified problem and can be reported and sold to the public.

Independent variable: the best method to get rid of them.

Dependent variable: washing with soap and water.

Hypothesis: Organic oils

Control group: water

Answer:

Step-by-step explanation:

D.
Heat each cube to the same temperature, place each cube into different containers with 500 grams of water at the same temperature, and measure the temperature of the water.

Answer:

Step-by-step explanation:

To solve this problem, we can use the conservation of energy and conservation of momentum principles.

Conservation of energy:

The total initial energy is the rest energy of the proton and neutron, which is given by:

Ei = (mp + mn)c^2

where mp and mn are the masses of the proton and neutron, respectively, and c is the speed of light.

The total final energy is the rest energy of the deuteron plus the energy of the gamma ray, which is given by:

Ef = (md)c^2 + Eg

where md is the mass of the deuteron and Eg is the energy of the gamma ray.

According to the conservation of energy principle, the initial energy and final energy must be equal, so we have:

Ei = Ef

(mp + mn)c^2 = (md)c^2 + Eg

Conservation of momentum:

The total initial momentum is zero because the proton and neutron are at rest. The total final momentum is the momentum of the deuteron and the momentum of the gamma ray. Since the gamma ray is massless, its momentum is given by:

pg = Eg/c

where pg is the momentum of the gamma ray.

According to the conservation of momentum principle, the total final momentum must be equal to zero, so we have:

0 = pd + pg

where pd is the momentum of the deuteron.

Solving for md and pd:

From the conservation of energy equation, we can solve for md:

md = (mp + mn - Eg/c^2)/c^2

Substituting this expression into the conservation of momentum equation, we get:

pd = -pg = -Eg/c

Substituting the given values, we have:

mp = 1.6726 × 10^-27 kg mn = 1.6749 × 10^-27 kg Eg = 2.2 × 10^6 eV = 3.52 × 10^-13 J

Using c = 2.998 × 10^8 m/s, we get:

md = (1.6726 × 10^-27 kg + 1.6749 × 10^-27 kg - 3.52 × 10^-13 J/(2.998 × 10^8 m/s)^2)/(2.998 × 10^8 m/s)^2 = 3.3435 × 10^-27 kg

pd = -Eg/c = -(3.52 × 10^-13 J)/(2.998 × 10^8 m/s) = -1.1723 × 10^-21 kg·m/s

Therefore, the mass of the deuteron is 3.3435 × 10^-27 kg, and its momentum is -1.1723 × 10^-21 kg·m/s.

Answer:

Step-by-step explanation:

Time taken by the tomatoes to each the ground

using h = 1/2 g t^2 

t^2 = 2h/g = 2 x 50/ 9.8 = 10.2

t = 3.2 sec 

horizontal ditance = speed x time = 3 x 3.2 = 9.6 meters

The question specifies the diameter of the screw, therefore the IMA of this screw is 0.812? / 0.318 = 8.02