Questions and task on the subject: Engineering

Questions and task on the subject: Engineering

Engineering

Three bars, each of mass 3 kg, are welded together and are pin-connected to two links be and cf. neglecting the weight of the links, determine the force in each link immediately

P Answered by Specialist

Engineering

Unidirectional and continuous carbon fibers with a diameter of 6.5 micron are embedded within an epoxy that offers a yield point of 73 mpa. if the bond strength across the fiber-epoxy

P Answered by PhD

Engineering

What is the magnitude of the maximum stress that exists at the tip of an internal crack having a radius of curvature of 5.5 × 10-4 mm (2.165 × 10-5 in.) and a crack length of

P Answered by Specialist

Engineering

which phrases describe an irregular galaxy?

P Answered by PhD

9

Engineering

Summering kirchhoffs current law in your own words

P Answered by PhD

1

Engineering

Alarge spherical tank contains gas at a pressure of 400 psi. the tank is constructed of high-strength steel having a yield stress in tension of 80 ksi. for volume requirements,

P Answered by PhD

1

Engineering

Ajoining process in which a filler metal is melted and distributed by capillary action between faying surfaces, the base metals does not melt, and in which the filler metal melts

P Answered by PhD

Engineering

A240 v, 60 hz squirrel-cage induction motor has a full-load slip of 0.02 and a full-load speed of 1764 rpm. the winding resistance of the rotor is 0.6 ω and a winding reactance

P Answered by Master

Engineering

As jamar prepares for a face-to-face interview, he begins to brainstorm a list of stories he can use to highlight his skills and qualifications. what types of stories should he

P Answered by PhD

1

Engineering

Apressure gage and a manometer are connected to a compressed air tank to measure its pressure. if the reading on the pressure gage is 11 kpa, determine the distance h between

P Answered by Master

Engineering

An alloy is evaluated for potential creep deformation in a short-term laboratory experiment. the creep rate is found to be 1% per hour at 800°c and 0.055% per hour at 700°c. (a)

P Answered by Master

Engineering

A15 ft high vertical wall retains an overconsolidated soil where ocr-1.5, c'-: o, ф , --33°, and 1 1 5.0 lb/ft3. determine the magnitude and location of the thrust on the wall,

P Answered by Specialist

Engineering

Water flows through a horizontal 60 mm diameter galvanized iron pipe at a rate of 0.02 m3/s. if the pressure drop is 135 kpa per 10 m of pipe, do you think this pipe is a) a new

P Answered by Specialist

Engineering

Aerial photography was taken at a flying height h ft above average terrain. if the camera focal plane dimensions are 9 x 9 in, the focal length is fand the spacing between adjacent

P Answered by Master

1

Engineering

A1 m3 rigid tank initially contains air whose density is 1.18kg/m3. the tank is connected to a high pressure supply line througha valve. the valve is opened, and air is allowed

P Answered by Specialist